|
Milwaukee 6955-20 12-Inch Sliding Dual Bevel Miter Saw with Digital Miter Angle Fine Adjust | 
| Brand: Milwaukee
Category: Home Improvement
Department: Tools, Auto & Industrial
List Price: $1,260.00
Buy New: $649.00
as of 9/5/2010 06:29 CDT details
You Save: $611.00 (48%)
New (12) Used (1) Refurbished (1) from $449.00
Seller: Amazon.com
Rating:  reviews
Sales Rank: 3767
Media: Tools & Hardware
Number Of Items: 1
Shipping Weight (lbs): 1
Dimensions (in): 32 x 22.7 x 21.8
MPN: 6955-20
Model: 6955-20
UPC: 045242150410
EAN: 0045242150410
ASIN: B001BBTZY4
Availability: Usually ships in 24 hours
| |
| Features:
| • | Miter Angle Fine Adjust with Detent Override - makes it simple to dial-in precise miter angles | | • | Miter angle digital readout ; provides repeatable accuracy to 0.1-Degree | | • | Dual integral jobsite lights; fully illuminate the work piece and cut line from either side of the blade | | • | 15.0-Amp, 3.3-Max horsepower direct drive motor - provides increased power for high performance cutting in hard lumber | | • | Integral dust channel - captures 75-Percent of all dust and debris cut by capturing dust near the cut on both sides of the blade and directing it to the back of the saw |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
This Milwaukee dual-bevel sliding compound miter saw offers accuracy, power and ease of use. It includes a miter angle digital readout that provides repeatable accuracy to 0.1deg and fine adjust with detent override makes it simple to dial-in precise miter angles. Amps: 15, HP: 3.3, Blade Diameter (in.): 12, Bevel: Dual, Speed - No Load (RPM): 3200, Total Positive Miter Stops: 12, Max. Degree Miter Cuts - Left: 55, Max. Degree Miter Cuts - Right: 60, Total Positive Bevel Stops: 9, Max. Degree Bevel Cuts - Left: 48, Max. Degree Bevel Cuts - Right: 48, Arbor Size (in.): 5/8 or 1, Blade Included: Yes, Wrench Included: Yes, Dust Bag Included: Yes
|
| Customer Reviews:
 Waited A Long Time For This One! July 11, 2008
James Ringe (St. Germain, WI USA)
79 out of 81 found this review helpful
As a Home Improvement Contractor, I use these types of saws daily for multiple applications.
When it came time to upgrade miter saws I did a ton of research on the various models that were available. Reviews from online articles, tool magazines, talking to other professionals on the job to get their input.
I had all but settled on the Bosch 12" sliding Miter Saw about 3 months ago, when I heard the rumor that Milwaukee was right about to run this saw out. So I waited. Again-(I had heard this rumor before)
When I first saw the press release on Milwauke's website, I was excited. The $699.00 price tag didn't matter much as you expect to pay for quality, and the 12" Dual Bevel Sliders are pretty much running in that neighborhood. (There are some retailers that are trying to get like $770.00 for these saws so be careful and make sure they aren't gouging you.)
After selling a couple of deck jobs I made some calls and found that our local Home Depot had just got the saws in that morning.
I will say that I was surprised when I picked up the box, it was considerably smaller and lighter than I had expected it to be. I got the saw back to the shop and pulled it from the box. The first thing I noticed is that there is not a hold down or workpiece clamp that comes with the saw. Not sure if they make an add on package or what. But a hold down clamp is nice and I missed it during my test runs. Once unboxed, I promptly mounted it my stand. Again very light for a saw of this size which is cool because I move my saw around allot.
All of the factory settings were accurate. Square to the table, square to the fence....etc. Real happy with that. The digital miter gauge is pretty cool, but is not really necessary for most everyday uses. The detents are deep and accurate, and the miter scale is easy to read.
I like the depth of cut setting allowing for groving and rabbiting. This is real simple but functional which is what it needs to be and no more.
I would have liked a Zero Stop on the Bevel because it is a bit disconcerting after cutting and angle to make sure you are back to zero, but I can live past that.
The blade that came with the saw was adequate and the saw cut smoothly and accurately.
I again, while testing was missing a workpiece clamp and for the most part that is the reason why I only gave the saw a 4 out 5. It would have been nice to have and you expect it with a saw for 699.00 honestly.(When you buy a cadillac....)
The dust collection is real good. Only finer particles get through, but I felt the dust bag is a bit small because it can be filled up with only a few small cross cuts. It could have been a bit bigger and hey why not put the Milwaukee Logo on it?? It seems kind of cheap that they didn't do that. Not a biggie but again for 70.00 you would expect it.
The constant power technology that keeps the saw at an even RPM during tough cuts works great. It is a bit strange when you first fire up the saw and make a cut because it is idfferent from other saws. You can really tell the consistent power thing, it is just hard to quantify how.Try it out and you will see what I mean. The soft start and brake is nice and overall the saw is real smooth.
Overall it is a great saw. It is the most powerful on the market, and it is accurate.It is the little things that keep it from being perfect. Retrosepctively, I am glad I waited to buy this saw, and I would recommend it to others highly. But Milwaukee has to get better at the little things in the future. They are putting out allot of new innovative things lately, and my hope is that they are not skimping on the details to flood the market with these innovations. My experience with Milwaukee is that they are "tools for life" and I hope that this saw lasts as long as my other Milwaukee tools have.
 Great saw April 23, 2009
Westley Rosenbaum
44 out of 44 found this review helpful
I am a rough and trim carpenter and I got this saw about 5 months ago. I have used many different 12" sliders from the new Makita, new Bosch, new DeWalt. This is the best one I have used.
Let me start by saying this saw DOES HAVE A 0 DEGREE BEVEL POSITION STOP!!!! Do not get discouraged by all of the other comments on here that say it doesn't, because apparently they don't know how the saw's bevel adjustment handle works. It has 2 positions. You can pull it all the way up, allowing you to move it to any degree you wish, OR if you pull it halfway up, it will click into your various detents INLCUDING 0 degrees!
I will start with the weaknesses, which aren't much:
First, as mentioned by one of the other reviewers, the right side of the fence does not slide. This is due to the fact that when the saw is beveled to the right, the motor housing gets in the way and hits the fence. You can remove the upper part of the fence on that side, but then you are left with just about a 1 inch auxillary fence, so when you use a right bevel you will always have to support the workpiece on the left side and have the right side being the cut-off end. Kind of discouraging, but you will just have to make your cuts accordingly.
Another weakness (but small) is again already mentioned, no clamp is included for the workpiece. I have never used one before because I have always been set up with a stand that provides plenty of support, but for those of you who use one often, it is something to check into. I'm not sure if they even make one for it... ? Neither of these weaknesses were enough for me to lower the rating to 4 stars, though.
Now the good stuff, the strengths:
Dust collection. I do not know why one reviewer put this down as a weakness. Maybe he was expecting a miter saw to collect all of the dust? I do not know of any tool that will do this without the use of some sort of shop vac. I will agree with D. Trelford that it collects about 50% of the dust. Compared to any other miter saw out there, it does excellent!
Deflection. With larger crosscuts requiring you to extend the saw all the way out, a steady hand with an even amount of force throughout the cut will provide no deflection. Of course with any 12" slider you might expect a very minute bit of deflection when fully extended, but this saw is very sturdy. When browsing saws next time you're at Home Depot or where ever it is you go, fully extend this saw, try forcing side play on it, and compare it to the others. It does a great job and takes quite a bit of force to move it side to side. If you get this saw and down the road sometime you witness any wandering cuts, I would be willing to bet it's due only to a dull blade and not any play in the rail slides. It is that sturdy. A poor example of side to side play I have witnessed is in the new Bosch slider. I could skew my cuts a good 1/16" when cutting some 12" trim, and that was with a brand new $140 CMT blade.
Digital angle readout with micro adjust. This works very well. You can be in "free" mode and swing any angle you want, or you can engage in "micro adjust" mode. It is easy to switch between the two and there are even dircetions printed on the saw right next to the locking knob. Once you do it once or twice it is a breeze. As with almost any saw, when you tighten down on that odd angle, that force of the screw turning clockwise and tightening against the table might cause it to move off of your mark a fraction of a degree. This almost never happens with this saw, and even if it does it's MAYBE a 1/10 of a degree. And if it happens, so what because you've got a digital readout so you know exactly where you're at. It's easy to adjust, and if you're zero'd in on 44.7 degrees and you have to change it for a back-cut on a cope or something, you can dial back in exactly where you had it at 44.7. I found it to be very useful and it didn't get in the way or seem "gimmicky" to me at all.
All around sturdy. As I mentioned it performs well when sliding, it is also very sturdy when adjusting the bevel. You do not have to hold the weight of the saw up like most saws when you unlock the bevel. The table also swings very smoothly yet feels robust at the same time.
Lighter than expeceted. Don't get me wrong it still has some weight behind it, just doesn't feel so much like a ton as compared to some other 12" sliders out there.
Lights. I was just using my saw on a remodel and I had the saw set up in a room with unfinished lighting. I was cutting trim that was very dark (hard to see the pencil mark) and on a dreary day with little sunlight, those lights helped out a lot. Unlike one of those lasers. Now that's a gimmick to me. What if you are using a Freud thin kerfed blade or a Forrest Chopmaster with a full 1/8" kerf? Does the laser only ride on one side of the blade so it doesn't matter what size kerf you have anyway? No because what if you want to cut the other side of the line, then you're just suppose to guess how thick the blade is? Then there's some lasers that shine on both sides of the blade. Easily adjustable? Plus when you slide your piece and your pencil mark hits the laser you can barely see it! And for those of you who don't have the best eyesite to begin with... well it's just something to consider. Screw the laser, I'd rather trust my eyeball seeing the blade hit my pencil mark.
Adjustable Dado cutting ability. Not that you would use this often but it is a neat feature and I'm suprised there aren't more saws out there that offer it. I think some Hitachi's and Makita's offer this too. On this one there is a little steel plate that swings to interfere with an adjustable screw to adjust the depth of cut. Not a deal breaker or anything, but it did come in handy when I had to whip together a mini door jamb for an attic crawl space.
Of course all of the other things such as cutting capacity with bevels and miters, large fence, constant power. All in all, awesome saw. If you're like me, you like to thoroughly check into a tool (especially the more expensive ones such as these) as much as possible before making a decision. Hopefully my two cents have helped. I think this is a great saw for the price and I have had no complaints. All of the 12" sliders are around the same price with exceptions of Rigid, Masterforce, etc. One miter saw I have not used is the Festool Kapex. I wish I could help out with that one, but I haven't used it so I don't know how it compares. But at $1,300 I don't know that I'll ever come across someone that has one. But even that saw seems to have too many gadgets and moving parts.
Milwaukee Knows Tools September 21, 2008
D. Trelford (Scottsdale, Arizona)
38 out of 39 found this review helpful
This is my third miter saw and I'm pleased to report that the manufactures are finally getting it right. This saw has a lot going for it like a 5 1/4" tall fence so cutting wide crown moulding in position is no problem. It has a 13 1/4" cutting capacity for 3/4" material. It is solid and well balanced, which is a prerequisite for any kind of accurate work. I like the work lights. (there are two of them, one on each side of the blade) While they aren't much help in daylight they sure come in handy as the sun sinks slowly in the west. I was also pleasantly surprised at how useful the digital readout was. I have found numerous times when I needed to tweak my cut by just a degree or two and the readout allowed me to do just that with consistency. The readout is also lit from behind by a soft green glow so it's easy to see in dim light. In fact I found myself wishing this saw had a digital readout for the bevel angles too! Speaking of bevels, the single wide lever in back for adjusting bevel angles is a thing of beauty and works like a charm. My saw is now permanently positioned on a dedicated "miter saw" table where I use it for woodworking in my shop, as opposed to rough carpentry work. I'm so glad Milwaukee didn't put one of those stupid laser gimicks on this unit, they aren't accurate and nobody uses them after the first week. This saw has many fine points and only a couple things that I could find fault in. First is that I was expecting the dust collection to be better than what it is. Milwaukee says it collects around 75% but in reality it is closer to 50%. Still it's better than all the other saws out there. Second is that there's no supplied miter clamp or hold down. I don't always use one but when I do it's nice to have. It should have been included. And third isn't really a concern with this particular saw but with all 12" sliding miter saws. You need to use a very smooth/straight arm motion in order not to flex the guiding rods or blade when making sliding cuts in order not to have a rough edge. It seems to be more pronounced with the larger 12" blade. This is no concern when using smaller 10" blades or when making a chopping cut with this saw. All in all this is one fine machine and other than my minor gripes with dust pick up and the non existing hold down, I'd have to say that it is worthy of a home in your shop.
Awesome tool! November 26, 2008
Paul Harrelson (Ga)
36 out of 37 found this review helpful
I have been using a Hitachi C10FS for many years now and have been very pleased with its performance. I have no complaint with my Hitachi but have had on occasion the need for a 12" capacity. I had previously looked at the Hitachi 12" slide miter at Lowes, but was unimpressed with the gadgets and the saw seemed to flex and wander. The quality was also lacking in the Dewalt, and I had pretty much decided on the Makita LS1214, and was prepared to purchase one when Milwaukee came out with their 6955-20. Home Depot had them in stock so I was able to evaluate the fit, finish, stability and check out the flex, wander and general quality of the saw. I was very impressed. Although the saw was manufactured in Taiwan and not in the US, the quality seemed every bit the standards I have come to expect from Milwaukee on their previous domestically produced tools.
Strengths:
Very sturdy and accurate.
Makes 60 deg right cuts and 55 deg left cut capacity.
Digital fine adjustments for miter cuts.
Adequate dual lights on ether side of blade.
Constant Power Technology (resulting in smoother cuts).
Easy to read positive miter stops.
50 deg bevel left and right.
Large fence.
Depth paw stop for switching back and forth from full to partial depths.
Direct drive
No unnecessary gadgets.
Weaknesses:
Dust collection (as with all miter saws).
Right fence does not slide.
No vice clamp.
Expensive.
This saw is top notch! Smooth, very powerful, accurate and very well-built. I mounted this saw on a Ridgid miter stand and can setup and take down in seconds. Everything was well adjusted from the factory, only a minor adjustment of one of the bevel angle indicators needed to be corrected. The digital readout has proven useful, especially on those not so square, stain grade joints that must be perfect. The motors Constant Power Technology has a different feel when cutting, but performs flawlessly. I am glad they decided to forgo the laser gimmick in lieu of the dual lights which proved to be more valuable than I had anticipated. The depth paw stop has proved very handy a couple of times already, when having to switch back and forth from full to partial depths on a job.
I have some Milwaukee tools that are over 30 years old, only having to replace rotting electrical cords or brushes. I would not be surprised to find this tool falling into the same category...
 Good saw but could be better November 11, 2009
Tom and Marie Brandt
24 out of 27 found this review helpful
We have 5 sliding compound miters in my kitchen and bath remodeling business and added a 6955 about 5 months ago. Luckily I don't have to go in the field everyday, but I keep tabs on which saws leave the shop first and most often for jobs. The first month we owned it, the 6955 was used constantly and was the first out the door. But as time went on and the newness wore off, the Milwaukee tended to be the 4th or 5th out the door with the workers migrating back to the 2 Ridgid 1290LZA's, a Dewalt DW718 and a Bosch 5412 before sulking about having to take the 6955. I personally feel that the Milwaukee is a very capable saw that is for more suited for rough framing than fine finish work. I just find there is alot of undefinable "flex" in the 6955 that leaves my cuts less than completely accurate sometimes, and I have heard a few of my guys echo that opinion. It is a "feel" thing that I just can't explain. The other thing is the lack of an integrated work clamp which is very handy for crown molding work and other tasks. I like the built-in worklights and think it is the best saw in this class for dust collection, although that isn't saying much since all of them are essentially poor at this task, unless you have a vacuum collection system attached. My favorite? Personally, I like the Bosch and the Ridgid about equally.
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. | 10 compound miter saw,10 inch compound miter saw,10 sliding compound miter saw,12 compound miter saw,12 inch compound miter saw,12 inch sliding compound miter saw,12 sliding compound miter saw,best compound miter saw,bosch compound miter saw,compound miter saw,compound miter saw laser,compound miter saw ratings,compound miter saw review,compound miter saw stands,compound miter saws,double bevel sliding compound miter saw,dual compound miter saw,hitachi 12 inch compound miter saw,hitachi compound miter saw,hitachi sliding compound miter saw,makita compound miter saw,makita sliding compound miter saw,metabo compound miter saw,review sliding compound miter saw,ridgid 12 inch compound miter saw,ridgid compound miter saw,rigid compound miter saw,ryobi compound miter saw,skil 10 compound miter saw,skil compound miter saw,slide compound miter saw,sliding compound miter saw,cheap compound miter saw,discount compound miter saw,compound miter saw sale |
|
|
| |
